Posted 05 February 2018 - 08:20 AM
I have a working copy of my GhostSDR software. It is Alpha quality so expect some bugs etc and I have not tided up the GUI much, as I wanted to release this first before going onto Beta and Final Release.
Once you have an SDR, they are really cheap off ebay or a bit more expensive at RTL shop . I got the RTL V3 version
You now need SDR# from www.airspy.com and then the Net Remote plugin from Ear to Ear Oak
A lot more details are at my site in the Research section
I will now be spending a while tidying up the GUI and condensing the code, then start looking at what else to add before releasing the final release copy.
Just play with the different frequency ranges, skips and delays. The long the delay means more time on a particular frequency and if that contain audio then you will start to pickup up audio fragments.
Comments are welcome.
My personally long term plans are to connect my scole device in as the antenna while testing.
Posted 12 February 2018 - 06:00 PM
I have a bit more error checking to work with but I have really improved the interface.
I have also added the ability to change the FilterBandwidth when scanning.
Posted 15 February 2018 - 02:43 AM
So, the GUI has now been finished and simplified.
If anyone is interested, just head over to my research page on my site, read the page, get the necessary items and download GhostSDR and give it a try. Remember you will need a SDR Device first.
This is free software.
Current Version is 0.2.706
Enjoy main-ghostsdr.png 34.25K 4 downloads
Edited by Capt-Zeanie, 15 February 2018 - 02:46 AM.
Posted 19 February 2018 - 11:42 AM
I have run a couple of sessions using 1445-1500 kHz which Jurgenson favoured 1485 kHz.
No voices or EVP coming through.
Tonight, I am going to try again and this time will try a session with my Scole Device plugged into the Antenna socket.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users